Table of Contents:

Overview

Part 1

Part 1 - Table of Contents

Part 2

Part 3

Electrical

Fuel Systems

Ventilation

Safe Loading

Flotation

Downloads

Part 1—Regulations and Other Information

CODE OF FEDERAL REGULATIONS – TITLE 33 – NAVIGATION AND NAVIGABLE WATERS

PART 183—BOATS AND ASSOCIATED EQUIPMENT

Subpart F—Flotation Requirements for Inboard Boats, Inboard/Outdrive Boats, and Airboats

Sec. 183.114—Test of flotation materials

(a) Vapor test. The flotation material must not reduce in buoyant force more than 5 percent after being immersed in a fully saturated gasoline vapor atmosphere for 30 days at a minimum temperature of 38 deg. C.

(b) 24-hour gasoline test. The flotation material must not reduce in buoyant force more than 5 percent after being immersed for 24 hours at 23 plus or minus 2 deg. C in reference fuel B, of ASTM D 471 (incorporated by reference, see Sec. 183.5).

(c) 30-day gasoline test. The flotation material must not reduce in buoyant force more than 5 percent after being immersed for 30 days at 23 plus or minus 2 deg. C in reference fuel B, of ASTM D 471 (incorporated by reference, see Sec. 183.5).

(d) 24-hour oil test. The flotation material must not reduce in buoyant force more than 5 percent after being immersed for 24 hours at 23 plus or minus 2 deg. C in reference oil No. 2, of ASTM D 471 (incorporated by reference, see Sec. 183.5).

(e) 30-day oil test. The flotation material must not reduce in buoyant force more than 5 percent after being immersed for 30 days at 23 plus or minus 2 deg. C in reference oil No. 2, of ASTM D 471 (incorporated by reference, see Sec. 183.5).

(f) 24-hour bilge cleaner test. The flotation material must not reduce in buoyant force more than 5 percent after being immersed for 24 hours at 23 plus or minus 2 deg. C in a 5-percent solution of trisodium phosphate in water.

(g) 30-day bilge cleaner test. The flotation material must not reduce in buoyant force more than 5 percent after being immersed for 30 days at 23 plus or minus 2 deg. C in a 5-percent solution of trisodium phosphate in water.

(h) The buoyant force reduction in paragraphs (a) through (g) of this section is measured in accordance with ASTM D 2842 (incorporated by reference, see Sec. 183.5).

Table 183.114—Flotation Performance Tests

Test 183.114
Area 183.110
(b) Engine-room bilge
(c) Engine-room unless open to atmosphere
(d) Bilge
(a) Vapor test  
X
 
(b) 24 hour gasoline test
X
(c) 30 day gasoline test
X
(d) 24 hour oil test
X
(e) 30 day oil test
X
(f) 24 hour bilge cleaner test
X
(g) 30 day bilge cleaner test
X

 

[CGD 77-145, 43 FR 56859, Dec. 4, 1978; 44 FR 47934, Aug. 16, 1979, as amended by USCG-2000-7223, 65 FR 40059, June 29, 2000]

Previous  |  Next

 

USCG red rod