|
CODE OF FEDERAL REGULATIONS – TITLE
33 – NAVIGATION AND NAVIGABLE WATERS
PART 181—MANUFACTURER REQUIREMENTS
Subpart B—Manufacturer Certification of Compliance
Sec. 181.5—Purpose and applicability
This subpart prescribes requirements for the
certification of boats and associated equipment to which 46
U.S.C. Chapter 43 applies and to which a safety standard prescribed
in Part 183 of this chapter applies.
[CGD 85-002, 51 FR 37573, Oct. 23, 1986]
Sec. 181.7—Compliance certification
label required
Unless there is affixed to it a certification
label that contains the information required by Sec. 181.15:
(a) No person who manufactures, constructs,
or assembles a boat or associated equipment may deliver that
boat or equipment for the purpose of sale;
(b) No person may import into the United States
any boat or associated equipment; and
(c) No person engaged in the business of selling
or distributing boats or associated equipment may sell or
offer for sale any boat or associated equipment.
Sec. 181.9—Affixing labels
(a) Each manufacturer of a boat or item of associated
equipment to which a standard or regulation prescribed in
Part 183 of this chapter applies shall affix a certification
label that contains the information required by Sec. 181.15
to that boat or equipment before it:
(1) Leaves the place of manufacture for the
purpose of sale; or
(2) Is imported.
(b) The manufacturer of a boat or item of associated
equipment that is sold to a private label merchandiser may,
at the option of the private label merchandiser, affix a certification
label identifying the private label merchandiser as the manufacturer
before the boat or item of associated equipment leaves the
place of manufacture.
Sec. 181.11—Exceptions to labeling
requirement
(a) This part does not apply to boats or associated
equipment intended solely for export, and so labeled, tagged,
or marked on the boat or equipment and on the outside of the
container, if any, which is exported.
(b) If an item of associated equipment is so
small that a certification label that meets the requirements
in Sec. 181.15 cannot be affixed to it, a certification label
that contains the information required by Sec. 181.15 may
be printed on the smallest container in which the item is
packed or on a slip packed with the item.
(c) This subpart does not apply to any outboard
motor or starting control to which Sec. 183.710 of this chapter
applies.
[CGD 72-60, 37 FR 15779, Aug. 4, 1972,
as amended by CGD 79-137, 46 FR 3515, Jan. 15, 1981; 46 FR
9579, Jan. 29, 1981]
Sec. 181.13—Removal of labels
No person may remove a label required by this
part or remove or alter any information on a label required
by this part, unless authorized by the Commandant.
Previous |
Next
|
