Fuel
Systems
Appendix B — References and Resources
The following standards are referenced in this
regulation:
| ASTM
D 471 |
“Test Method for Rubber Property - Effect of Liquids”.
Applies to section 183.516. |
| ASTM
D 1621 |
“Test Method
for Compressive Properties of Rigid Cellular Plastics”.
Applies to section 183.516. |
| MIL
P-21929B |
“Plastic
Material, Cellular, Polyurethane, Foam in Place (2 pounds
per cubic foot)”. Applies to section 183.516. |
| SAE
J1527 |
“Marine
Fuel Hose”. Applies to section 183.540. |
| UL
1114 |
“Marine
Flexible Fuel-line Hose”. Applies to section 183.540. |
ASTM standards are available from the American
Society for Testing and Materials, 100 Barr Harbor Drive,
West Conshohocken, PA 19428-2959, (610) 832-9585.
MIL standards are available from Document Automation
and Production Service, 700 Robins Ave, Bldg 4, Section D,
Philadelphia, PA 19111-5094, (215) 697-2179.
SAE standards are available from the Society
of Automotive Engineers, 400 Commonwealth Drive, Warrendale,
PA 15096, (412) 776-4841.
UL (Underwriter Laboratories) standards are
available from COMM 2000, Inc., 1414 Brook Drive, Downers
Grove, IL 60515, (888) 853-3503.
The United States Coast Guard Compliance Test
Procedures — Fuel System Standard Test Procedure, published
Jan/78 is available from:
American Boat & Yacht Council Inc.
3069 Solomons Island Road
Edgewater, MD 21037-1416
(410) 956-1050
www.abycinc.org
Email: info@abycinc.org
Previous
|
