Electrical Systems

Figures and Tables

FIGURE 1 - Applicability
FIGURE 2 - Conductor Gauge
TABLE 1 - Conductors
FIGURE 3 - Isolation of Electrical Components
FIGURE 4 - Isolation of Electrical Components
FIGURE 5 - Isolation of Electrical Components
FIGURE 6 - Isolation of Electrical Components
FIGURE 7 - Isolation of Electrical Components
FIGURE 8a - Isolation of Electrical Components
FIGURE 8b - Isolation of Electrical Components
FIGURE 8c - Isolation of Electrical Components
FIGURE 9 - Isolation Bulkhead Requirements
FIGURE 10 - Bulkheads
FIGURE 11 - Cranking Motor Circuits
FIGURE 12 - Battery Restraint Test
FIGURE 13 - Installation in a Battery Box
FIGURE 14 - Ungrounded Battery Terminal Connection
FIGURE 15 - Dielectric Shielding Envelope
FIGURE 16 - Battery Location vs. Fuel System
FIGURE 17 - Battery Terminal Connections
FIGURE 18 - Insulated, Stranded Copper Conductor
TABLE 5 - Allowable Amperage of Conductors
TABLE 5A - No More Than 2 Conductors Are Bundled For 50 Volts and Over
TABLE 5B - 3 Conductors Are Bundled
TABLE 5C - 4 to 6 Conductors Are Bundled
TABLE 5D - 7 to 24 Conductors Are Bundled
TABLE 5E - 25 Or More Conductors Are Bundled
FIGURE 19 - Permitted Conductor Size
TABLE 6 - Flexible Cords and Cables (from Article 400, NEC)
FIGURE 20 - Ignition Conductor Connections
FIGURE 21 - Abrasion Protection
FIGURE 22 - Terminal Protection
FIGURE 23 - Overcurrent Protection
FIGURE 23 - Overcurrent Protection (Continued)
FIGURE 24 - Overcurrent Protection Exceptions
FIGURE 25 - Location of Overcurrent Protection
FIGURE 25 - Location of Overcurrent Protection (Continued)
FIGURE 26 - Voltage Rating of Overcurrent Protection
FIGURE 27 - Alternators and Generators
FIGURE 27 - Alternators and Generators (Continued)

Previous  | Next